PLEASE NOTE: DO NOT ADD THIS PRODUCT TO BASKET. YOU CAN DOWNLOAD THE DRIVERS ON THIS PAGE.
Installing the latest Scanner Validation Tool (SVT) from the link on the bottom of this page will install both the latest TWAIN Data Source, and the latest ISIS Driver for the i200 Series Scanners. You must install the SVT to access these drivers, and to use the integrated Host Image Processing software, known as HIPPO.
All i200 Series Scanners, with or without the Flatbed Accessory, should be brought up to this level of Host Software, and the Firmware MUST be updated to v 2.5.5 i200 Firmware after the new SVT is installed. If this isn’t done the scanner will not work properly.
Software Driver Versions included in the latest SVT 5.20 - January 2005
- TWAIN data source V6.43.0 (This is a 32-bit data source, and is TWAIN 1.9 compliant)
- ISIS driver 1.1.10501.7001
- HIPPO v3.16 (Host Image Processing for both TWAIN and ISIS Drivers)
- STI driver v 2.5
IMPORTANT Note for KODAK Capture Software Users
- If you install the latest SVT 5.20 and Firmware 2.5.5 you must use KODAK Capture Software Version 6.6 or higher in order for the scanner to work properly. Download (Right Click and Save Target As..) the Lite version of Capture Software. To upgrade to the latest Full version of Capture Software, contact your Regional (local) Kodak Support Center.
IMPORTANT NEW FEATURES OF THIS SOFTWARE
- Adds the ability to accept custom color tables created with the Brightness and Contrast Control
- Adds iThresholding feature to the i250 and i260 scanners. Note: if you are using Kodak Capture Software you will need to upgrade to Version 6.6 or higher to use this new feature (see above Note on using KODAK Capture Software).
- Allows the i280 to scan as a single image documents up to 34" long.
- After SVT is installed, a reboot is required.
- SVT will no longer overwrite newer versions, you MUST UNINSTALL to load "older" versions
FOR WINDOWS 98SE ONLY, USE THIS UNINSTALL PROCEDURE
- Run the Uninstaller (Note: For all other Operating Systems, the Uninstall is complete and correct, go to step 8)
- Delete the following directory/folder and any sub-directories/folders:C:\windows\twain_32\kodak\kds_i200
- Delete the following directory/folder and any sub-directories/folders:C:\Program Files\Kodak\Document Imaging
- Delete file: C:\windows\system\kdssti.dll
- Delete file: C:\windows\inf\other\kdssti.inf (Note: inf is a hidden directory)
- Delete file: C:\windows\system32\drivers\kdsmm.sys
- Delete files: C:\windows\PIXTRAN\Eki200*.*
- Restart Windows
- Install the required version of SVT
Scanner Validation Tool for i200 Series Scanners (7.3 MB) (Right Click and 'Save Target As..')
Brightness and Contrast Control for i200 Series Scanners v2.10.0 (817K) (Right Click and 'Save Target As..')
